Chart
Hand embroidery needle sizes: chart by thread and fabric
Published
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Short answer
Hand embroidery (crewel) needles run from size 1 to size 12, and a bigger number is a finer needle. As a starting point use size 9 or 10 for 1 or 2 strands of floss, size 7 for 2 or 3 strands, size 5 for 3 or 4 strands and size 3 for all 6 strands. The right needle makes a hole just large enough for the thread to follow.
Gear for this job
All 6 picks comparedClover Gold Eye Embroidery Needles, 16 Pack
See price on AmazonSee it on AmazonJohn James embroidery needles, sizes 5/10, 16 pcs
See price on AmazonSee it on AmazonSINGER Crewel Needles in Dial Compact, Set of 24
See price on AmazonSee it on Amazon

This chart is for hand embroidery needles, the sharp, long-eyed needles also sold as crewel needles. They usually come in mixed packs marked 'sizes 3-9' or 'sizes 1-5', with nothing to say which needle suits which thread. The thread decides: the eye has to take the strands without fraying them, and the shaft has to open a hole the thread can pass through. Diameters and lengths below are the figures John James publishes. The strand pairings are starting points, because sources overlap by a size. Machine embroidery needles (75/11, 90/14 and so on) use a different numbering system and are not covered here.
Hand embroidery needle size chart
Read down to the number of strands you plan to thread, then across to the size. Where two sizes suit the same strands, start with the finer one on light fabric and the thicker one on closely woven fabric. Sizes 1 to 5 are all quoted for six strands by one source or another, and size 3 is the usual pick.
| Needle size | Diameter | Length | Strands of floss |
|---|---|---|---|
| 1 | 1.02 mm | 48.5 mm | 6 |
| 2 | 1.02 mm | 48.5 mm | 6 |
| 3 | 0.86 mm | 45 mm | 6 (the usual pick) |
| 4 | 0.86 mm | 45 mm | 4 to 6 |
| 5 | 0.76 mm | 41.5 mm | 3 or 4 |
| 6 | 0.69 mm | 38.5 mm | 3 |
| 7 | 0.69 mm | 38.5 mm | 2 or 3 |
| 8 | 0.61 mm | 34 mm | 2 |
| 9 | 0.61 mm | 34 mm | 1 or 2 |
| 10 | 0.53 mm | 32.5 mm | 1 or 2 |
| 11 | not in the John James crewel table | not listed | 1 |
| 12 | 0.41 mm | 29.5 mm | 1 |

Note.The numbers are not stamped on the needles. Keep each size in its own slot of the pack or a labeled case, or you will be sorting them by eye.
Embroidery needle sizes explained
The scale runs backward: a bigger number is a finer, shorter needle. A size 1 is 1.02 mm thick and 48.5 mm long. A size 12 is 0.41 mm thick and 29.5 mm long. The eye shrinks along with the shaft, which is why a fine needle will not take many strands.
The steps are not even. In the John James table sizes 1 and 2 share one wire diameter, as do 3 and 4, 6 and 7, and 8 and 9. That is why published charts disagree by a size and why moving one size either way rarely matters. The numbers also do not carry across needle types: a size 24 tapestry needle is 0.76 mm thick, the same as a size 5 embroidery needle.
What size needle to use for embroidery
Choose by thread first, then check against the fabric. The needle should make a hole just large enough for the thread, no larger. Thread the needle, take a few stitches on a scrap or in the margin, and listen and look.
How many strands a design needs is a separate question, covered in the strands of floss chart.
- Too small: the floss is hard to thread, drags through the fabric with a loud zipper-like sound, and frays near the eye after a few stitches. Go to a lower number.
- Too large: the needle is hard to push through closely woven fabric and leaves a visible hole around the thread. Go to a higher number.
- About right: the thread follows the needle with little resistance and the hole closes around it.
Which needle to pick from a pack of sizes 3-9
Variety packs are usually sizes 3 to 9 or sizes 1 to 5. Lay the needles side by side: the longest, thickest needle is the lowest number in the pack and the shortest, finest is the highest. A 3-9 pack covers everything from one strand to all six. A 1-5 pack is the thick end only, for 3 to 6 strands and heavier threads.
- Size 3, the thickest in the pack: all 6 strands of floss.
- Size 5: 3 or 4 strands, for bold lines and filled shapes.
- Size 7: 2 or 3 strands, the middle of the pack and a common general purpose size.
- Size 9, the finest in the pack: 1 or 2 strands, for outlines and small detail.
Which embroidery needle for 6 strands?
Start with a size 3. Sizes 1 to 5 are all quoted for a full six strands, so if the floss frays at the eye of a 3, drop to a 2 or a 1, and if the needle leaves holes in a fine fabric, try a 4. Separate the six strands and lay them back together before threading so they sit flat in the eye. The method is in how to separate embroidery floss.
For thread thicker than six strands, such as wool or ribbon, a chenille needle is the usual answer: it has a sharp point like a crewel needle and a much larger eye. Pearl cotton does not divide, so the needle is chosen for the whole thread. Its sizes are explained in embroidery floss sizes.
Embroidery needle types: crewel, tapestry, chenille, milliner
Four types cover nearly all hand embroidery. They differ in the point and the eye, and each has its own size range. The embroidery needle vs tapestry needle question comes down to the tip: a sharp crewel needle pierces the fabric wherever the design line goes, while a blunt tapestry needle slides into the existing holes of aida or evenweave without splitting the fabric threads.
For counted work, pick the tapestry size from the cross stitch needle size chart. If you are wondering about the needles already in your sewing box, see embroidery needle vs sewing needle.
| Type | Sizes | Point | Eye | Used for |
|---|---|---|---|---|
| Embroidery (crewel) | 1 to 12 | sharp | long | surface embroidery |
| Tapestry (cross stitch) | 13 to 28 | blunt | large | counted work on aida and evenweave |
| Chenille | 13 to 28 | sharp | large | thick thread, wool, ribbon |
| Milliner (straw) | 1 to 10 | sharp | small, round | French knots and bullion knots |
Quick answers
Short answers on hand embroidery needle sizes. The sizes are starting points: go one size either way if the thread drags or the hole shows.
- What size needle to use for embroidery? Size 9 or 10 for 1 or 2 strands, size 7 for 2 or 3, size 5 for 3 or 4, and size 3 for all 6 strands.
- What is the difference between an embroidery needle and a tapestry needle? An embroidery needle is sharp and numbered 1 to 12. A tapestry needle is blunt, has a larger eye and is numbered 13 to 28.
- Which embroidery needle for 6 strands? A size 3 crewel needle. Sizes 1 to 5 are all quoted, so go thicker if the floss frays at the eye.
- Does this embroidery needle size chart apply to machine needles? No. Machine needles use sizes such as 75/11 and 90/14, a different system.
- Which embroidery needle types does a beginner need? One mixed pack of crewel needles in sizes 3 to 9 covers 1 to 6 strands of floss.
Use this chart
Print it, save the image version, or put it on your own site or forum post with the code below. The code keeps a link back to this page as the source.
Embed code
<a href="https://hoopandfloss.com/blog/embroidery-needle-size-chart"><img src="https://hoopandfloss.com/charts/embroidery-needle-size-chart/image.png" alt="Hand embroidery needle sizes: chart by thread and fabric" width="600" loading="lazy"></a> <p>Source: <a href="https://hoopandfloss.com/blog/embroidery-needle-size-chart">Hand embroidery needle sizes: chart by thread and fabric</a>, Hoop and Floss</p>
What you need for this
- See price on AmazonAmazon
Clover Gold Eye Embroidery Needles, 16 Pack
- See price on AmazonAmazon
BEADNOVA stainless steel needle threaders, 20 pcs
From Best embroidery needle threaders for multi-strand floss
- See price on AmazonAmazon
PARKUVALLEY magnetic needle minders, set of 3
- See price on AmazonAmazon
DMC 1767-24 Tapestry Hand Needles, Size 24
From Best cross stitch needles: tapestry needles in sizes 24, 26 and 28