Chart
Embroidery hoop sizes: chart in inches and cm and which size to use
Published
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Short answer
Round hand embroidery hoops run from about 3 to 12 inches across, which is 7.6 to 30.5 cm or 76 to 305 mm. Pick a hoop 1 to 1.5 inches larger than the design, or use a smaller hoop and move it as you go. A 6 to 7 inch hoop (15 to 18 cm) is the comfortable size to hold in one hand.
Gear for this job
All 7 picks comparedNurge square plastic embroidery hoops, set of 3
See price on AmazonSee it on AmazonCaydo beech wood embroidery hoops, 7, 8 and 9 in
See price on AmazonSee it on AmazonMufekum Beech Wood Embroidery Hoops, 4-8 in, 5 Pcs
See price on AmazonSee it on Amazon

This chart is for round hoops used in hand embroidery and cross stitch: two rings of wood or plastic, closed by a screw. The number on the label is the diameter. US sellers print it in inches, and sellers elsewhere list the same hoops in cm or mm, which is where most of the confusion comes from. Two things decide the size to buy: how wide the design is, and how large a hoop your hand can grip while you stitch. Machine embroidery hoops are sized in a different way and are not covered here.
Embroidery hoop size chart in inches, cm and mm
Every size is a diameter. The conversions use 1 in = 2.54 cm = 25.4 mm, rounded to 0.1 cm and to the nearest whole mm. The design columns take 1 to 1.5 in off the hoop size, so the stitching stays clear of the rings on every side.
| Hoop size | cm | mm | Design it fits (in) | Design it fits (cm) |
|---|---|---|---|---|
| 3 in | 7.6 | 76 | 1.5 to 2 | 3.8 to 5.1 |
| 4 in | 10.2 | 102 | 2.5 to 3 | 6.4 to 7.6 |
| 5 in | 12.7 | 127 | 3.5 to 4 | 8.9 to 10.2 |
| 6 in | 15.2 | 152 | 4.5 to 5 | 11.4 to 12.7 |
| 7 in | 17.8 | 178 | 5.5 to 6 | 14.0 to 15.2 |
| 8 in | 20.3 | 203 | 6.5 to 7 | 16.5 to 17.8 |
| 9 in | 22.9 | 229 | 7.5 to 8 | 19.1 to 20.3 |
| 10 in | 25.4 | 254 | 8.5 to 9 | 21.6 to 22.9 |
| 11 in | 27.9 | 279 | 9.5 to 10 | 24.1 to 25.4 |
| 12 in | 30.5 | 305 | 10.5 to 11 | 26.7 to 27.9 |
What size embroidery hoop to use for a design
Measure the design at its widest point, add 1 to 1.5 in, and round up to the next hoop size. A design 4 in wide needs a hoop of at least 5 in, and a 6 in hoop gives it more room. The extra space matters because fabric is hard to stitch right against the ring: the needle hits the ring and the hand underneath has nowhere to go.
The hoop does not have to hold the whole design. A smaller hoop can be moved across the fabric as each area is finished, which is a normal way to work a piece larger than any hoop you want to hold.
- Design up to 5 in wide: a 6 in hoop holds all of it. Up to 6 in wide: a 7 in hoop does.
- Design 6 to 9 in wide: an 8 to 10 in hoop holds all of it, or a 6 to 7 in hoop can be moved from section to section.
- Design wider than 11 in: no round hand hoop in this range holds it at once. Move a hoop as you go, or use a frame.
What is the standard embroidery hoop size?
There is no single standard size. The closest thing to one is 6 to 7 in, because that is the size most hands hold comfortably: the rim sits in the palm and the fingers can still reach toward the middle of the fabric from underneath. If you are buying one hoop to start with, buy in that range and move it for anything larger.
Small hoops of 3 to 5 in suit single motifs and small finished pieces. Hoops of 10 in and more are awkward to grip at the rim for long, so they are usually used with a stand that takes the weight and leaves both hands free. The steps for loading any size are in how to use an embroidery hoop.
Embroidery hoop sizes conversion: cm and mm back to inches
To convert, divide cm by 2.54 or mm by 25.4. Sellers round the result, so metric listings rarely match the chart to the decimal. A hoop sold as 10 cm is a 4 in hoop, 13 cm is 5 in, 15 cm is 6 in, 18 cm is 7 in, 20 cm is 8 in, 25 cm is 10 in and 30 cm is 12 in. In mm the same hoops appear as 100, 130, 150, 180, 200, 250 and 300.
Note.Treat the label as a nominal size. If a design is a tight fit, measure across the opening of the inner ring, because that opening is the space you can actually stitch in.
Hoop size for cross stitch: work out the design size first
A cross stitch pattern gives its size in stitches, not inches. Divide the stitches by the fabric count to get inches, then add 1 to 1.5 in for the hoop. The table shows the result on 14 count aida. For other counts, the cross stitch calculator gives the stitched size and the fabric to cut, and the aida count chart shows how the same design shrinks on 16 and 18 count.
| Stitches across | Stitched size | Smallest hoop that holds it all |
|---|---|---|
| 50 | 3.6 in (9.1 cm) | 5 in |
| 75 | 5.4 in (13.6 cm) | 7 in |
| 100 | 7.1 in (18.1 cm) | 9 in |
| 125 | 8.9 in (22.7 cm) | 10 or 11 in |
| 150 | 10.7 in (27.2 cm) | 12 in |

Note.Cut the fabric with at least 3 in (8 cm) extra on every side of the design. That margin is also what gives the hoop enough fabric to grip at the edges.
Hand hoop sizes vs machine hoops and Q-Snap frames
Sizes written as two numbers, such as 4x4 or 5x7, are machine embroidery hoops. They are a different thing, and this chart does not apply to them. If a search for hoop sizes in mm returns rectangles, those results are about machines.
Q-Snap frames are also named by two numbers, but they are hand frames: square or rectangular plastic tubes with clamps that snap over the fabric. Common sizes are 6x6, 8x8, 11x11, 11x17 and 17x17 in. The size is measured on the outside of the frame, so the area you can stitch is smaller than the name. More on frames and on working with no hoop at all is in can you embroider without a hoop.
Quick answers
The short version of the chart, for anyone choosing a hoop size at the shelf or converting a metric listing back to inches.
- What size embroidery hoop to use? One that is 1 to 1.5 in larger than the design. For a design too big for a comfortable hoop, use a 6 to 7 in hoop and move it.
- What are embroidery hoop sizes in cm? 3 to 12 in is 7.6 to 30.5 cm. Metric listings are rounded: 10, 13, 15, 18, 20, 25 and 30 cm.
- What are embroidery hoop sizes in mm? Multiply inches by 25.4. The range is 76 to 305 mm, and a 6 in hoop is 152 mm.
- What is the standard embroidery hoop size? There is none, but 6 to 7 in is the size most people find comfortable to hold in one hand.
Use this chart
Print it, save the image version, or put it on your own site or forum post with the code below. The code keeps a link back to this page as the source.
Embed code
<a href="https://hoopandfloss.com/blog/embroidery-hoop-sizes"><img src="https://hoopandfloss.com/charts/embroidery-hoop-sizes/image.png" alt="Embroidery hoop sizes: chart in inches and cm and which size to use" width="600" loading="lazy"></a> <p>Source: <a href="https://hoopandfloss.com/blog/embroidery-hoop-sizes">Embroidery hoop sizes: chart in inches and cm and which size to use</a>, Hoop and Floss</p>
What you need for this
- See price on AmazonAmazon
Nurge square plastic embroidery hoops, set of 3
From Best embroidery hoops for hand embroidery: wood vs plastic
- See price on AmazonAmazon
ZOCONE beech wood lap stand with 6 and 8 in hoops
From Best embroidery hoop stands: lap, table clamp and floor models
- See price on AmazonAmazon
Q-Snap Needlework Frame Bundle, 3 Sizes
From Best cross stitch frames: Q-Snap frames and scroll frames compared