Cross stitch vs embroidery: how they differ and which to learn

Published Updated

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 7 picks compared

Cross stitch is a type of embroidery, but in everyday use the two words mean different crafts. Cross stitch is counted: you place X-shaped stitches on a grid fabric following a chart, one square at a time. Embroidery, when people say it on its own, usually means freestyle hand embroidery: many different stitches worked over a design drawn or printed on plain woven fabric, with stitch length and direction up to you. Both use the same six-strand floss, but the fabric, needles and skills differ.

Fabric and how the design gets there

Cross stitch is worked on aida, evenweave or linen, fabrics with countable holes. The design stays on a separate chart and you count it onto the fabric, or, in stamped kits, the chart is printed on the aida in washable ink. Fabric count sets the finished size: a design 140 stitches wide is 10 inches on 14 count and about 7.8 inches on 18 count.

Freestyle embroidery uses plain-weave fabric such as quilting cotton, linen, cotton-linen blends or even clothing. The design is traced with a water-soluble or heat-erasable pen, transferred with stick-and-stitch paper, or printed in a kit. Stitch size is set by the drawn lines, not by the fabric.

Stick-and-stitch transfer paper →

Needles: blunt tapestry vs sharp embroidery

Cross stitch uses blunt tapestry needles, usually size 24 for 14 count and 26 for 16 and 18 count. The rounded tip slides into the existing holes without splitting the fabric threads.

Freestyle embroidery uses sharp crewel (embroidery) needles, sizes 3 to 10, with a long eye for several strands of floss. The sharp point is needed because each stitch pierces the fabric wherever the design requires. Using a blunt needle for embroidery or a sharp one for cross stitch works poorly: blunt needles drag through plain weave, sharp ones split aida.

If you do both crafts, keep the two needle types in separate, labeled cases. They look similar at a glance, and picking up a sharp crewel needle for a cross stitch session is a common way to end up with split aida threads and uneven holes.

Embroidery needle size chart →

Stitches and skills

Cross stitch has a small toolkit: full cross, half and quarter stitches, backstitch for outlines and French knots for dots. The skill is counting accurately and keeping tension and top-leg direction consistent. Shading comes from color changes square by square, so a cross stitch picture is a kind of pixel art.

Embroidery has dozens of stitches: backstitch, split, stem and chain for lines, satin and long-and-short for fills, French knots, lazy daisy and woven wheels for flowers, and more. The skill is choosing stitch, strand count and stitch length to suit the shape. Results look more painterly and textured, and you can work freehand without any pattern at all.

Embroidery stitches for flowers →

Hoops, frames and floss

Both crafts use the same six-strand floss and the same skeins, so a DMC 321 is the same red in either. Strand counts differ: cross stitch on 14 count uses two strands throughout, while embroidery switches from one strand for fine detail to six for bold fills within one piece.

Embroidery almost always uses a hoop, because plain-weave fabric puckers without tension. Cross stitch on aida can be worked in hand for small pieces, though a hoop or Q-Snap frame keeps stitches even. Larger cross stitch projects often move to a scroll frame on a stand.

Embroidery hoops compared →

What you can make, and how fast

Cross stitch suits framed pictures, samplers, birth and wedding records, bookmarks, ornaments and anything with lettering or a detailed image. Because every square is stitched in the same size, it reproduces photos, pixel art and complex shading well. It is slower per square inch than embroidery when the design is fully stitched: a 5 x 7 inch piece on 14 count can hold close to 7,000 squares. Designs that leave the background bare finish much faster.

Embroidery suits hoop art, botanical pieces, monograms, patches, and decoration on clothes, tote bags and linens, since it works on almost any woven fabric. Line work goes quickly: a simple outlined design in backstitch or stem stitch can be finished in an evening, while dense satin and long-and-short fills take longer. Costs are similar for both crafts. A beginner kit for either is usually under 20 dollars, and the long-term supplies (floss, needles, hoops, scissors) are shared, which is why so many stitchers move between the two.

Which one to learn first

Start with cross stitch if you like following a pattern exactly, want predictable results and enjoy detailed pictures, samplers or lettering. One stitch to learn, and kits are inexpensive.

Start with embroidery if you want to decorate clothes and tote bags, prefer loose botanical styles, or want to draw your own designs. A beginner kit that teaches five to ten stitches over a few printed designs is the fastest route. Many people do both: the floss, scissors and hoop carry over, and only the needle and fabric change.

Beginner embroidery kits →

Frequently asked questions

Is cross stitch a type of embroidery? Yes. It is counted embroidery. Embroidery on its own usually means freestyle surface embroidery, which is why the two are compared.

Can I use embroidery floss for cross stitch? Yes. Six-strand embroidery floss is the standard cross stitch thread; you separate it into two strands for 14 count.

Which is easier, cross stitch or embroidery? Cross stitch is easier to get neat at the start because the fabric grid fixes stitch size. Embroidery has more to learn but gives more freedom.

Can I cross stitch without counting? Yes, with a stamped kit, where the design is printed on the fabric, or with waste canvas on plain fabric for a counted look.

What you need for this