How to cross stitch with a pattern: reading the chart step by step

Published

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 7 picks compared

To cross stitch with a pattern, treat each square on the chart as one stitch on your fabric, look up each symbol in the key to find its floss color and strand count, and count from the center of the chart and the center of your fabric. Bold grid lines every ten squares make counting easy, and lines drawn across squares are backstitch. Once you know those four things, every counted chart works the same way.

The grid: one square equals one stitch

A cross stitch chart is a grid where every square represents one full cross stitch on the fabric, one aida block or two linen threads. A colored or symbol-filled square means stitch it; an empty square means leave the fabric bare. Every tenth line is drawn heavier, so you can count in blocks of ten instead of one by one.

Arrows or triangles on the edges of the chart point to the center row and column. Find the center of your fabric by folding it in half both ways, and start stitching from the center of the design so it ends up centered on the fabric. Many stitchers baste a line along the center row and column, or grid the whole fabric every ten squares to match the bold lines.

14 count aida for counted charts →

The key: symbols, floss numbers and strands

The key, or legend, lists every symbol with its floss brand and color number, usually DMC, often with an Anchor equivalent and a color name. It also says how many strands to use, for example two strands for full stitches and one for backstitch, and sometimes the number of skeins needed. Some keys list separate symbols for full stitches and half or quarter stitches in the same color.

Before stitching, sort your floss by symbol: wind each color on a bobbin and write the symbol next to the number, or use a floss organizer card with the symbols marked. That way you never need to look up a number mid-row. If a chart has similar-looking symbols, highlight them in different colors on a working copy.

Floss bobbins for sorting by symbol →

Backstitch, fractional stitches and French knots

Solid lines drawn over the grid are backstitch, used for outlines and details. The key shows each line color and its floss number. Lines follow the grid lines or cut diagonally across squares; stitch them exactly as drawn, usually after the cross stitches in that area are done, so the outline sits on top.

Fractional stitches show as a symbol in only part of a square, or a square split diagonally between two symbols. A quarter stitch goes from a corner to the center of the square; a three-quarter stitch adds a half stitch across. Dots or small circles on grid intersections are French knots. Half stitches, a single diagonal, are often shown with a different symbol listed under half stitch in the key.

Working a chart from start to finish

Make a working copy of the chart, enlarged if you like, and keep the original clean. Start at the center, stitch a block of one color, and mark each stitched square on the copy with a highlighter or pencil as you go. Marking is the single best habit for avoiding missed or doubled stitches.

Work one color within a ten by ten block, then switch colors, or use the parking method, where you thread several colors at once and park each needle on the front ahead of its next stitches. Count new stitches from a nearby completed stitch or a bold gridline, never from the fabric edge. Every few rows, check one stitch against the chart by counting both ways from a bold line.

Needle minders for parking →

Symbol, color and PDF charts

Charts come in three common styles. Black and white symbol charts are the easiest to read when photocopied and the clearest for similar colors. Color block charts fill each square with an approximate floss color, which gives a quick picture of the design but makes close shades hard to tell apart. Many modern charts combine the two, with a symbol printed on a colored square, and that is the friendliest format for most stitchers.

PDF patterns can be printed or used on a tablet. Pattern-keeping apps let you zoom in, highlight finished stitches and hide colors you are not working on, which helps a lot on large charts that span several pages. If you print a multi-page chart, note the overlap: most designers repeat a few rows and columns at page edges, and those shared rows are marked so you do not stitch them twice.

Working out the finished size and fabric

Charts list the design size in stitches, such as 98 by 140. Divide each number by the stitches per inch of your fabric to get inches: 98 by 140 on 14 count is 7 by 10 inches, and on 18 count about 5.4 by 7.8 inches. Add at least 3 inches of margin on each side for framing, so a 7 by 10 inch design needs fabric about 13 by 16 inches.

If the chart only shows a grid without a stitch count, count the squares across the widest and tallest rows using the bold lines. Changing fabric count changes only the size, not the chart, so you can stitch any counted chart on any count as long as you adjust the strands to cover well.

Aida count size chart →

Frequently asked questions

What do the arrows on a cross stitch chart mean? They mark the center row and column. Start from the center of your fabric so the design is centered.

What does a blank square mean on a cross stitch pattern? Leave that square unstitched. The fabric shows through as the background.

How do I know how many strands to use? The key usually says. If not, use two strands on 14 count aida and one for backstitch.

Where should I start on a cross stitch pattern? At the center, or at the top left corner after measuring margins. Center starts are safest for a first chart.

What you need for this