# How many strands of floss to use: chart by fabric count and stitch

Source: https://hoopandfloss.com/blog/how-many-strands-of-floss
Published: 2026-10-01
Publisher: Hoop and Floss

**Short answer:** For cross stitch, use 2 strands of six-strand floss on 14 and 16 count aida, 3 strands on 11 count and 1 or 2 strands on 18 count. Backstitch usually takes 1 strand, or 2 for a bold outline. On 28 count evenweave or linen stitched over 2, use 2 strands. Surface embroidery has no fixed number: the pattern states it.

Embroidery floss comes as six loose strands so that you can choose how thick the working thread is. If the pattern or kit states a number, use that number: the design and its floss amounts were planned around it. The chart below is for when the pattern says nothing, the key is lost, or you are moving the design to a different fabric count. Two things decide the answer: the size of the holes in the fabric, and how solid you want the stitches to look. Published charts differ by one strand in places, and this page says where.

## Cross stitch: how many strands for each fabric count

Find your fabric in the left column. The second column is for full cross stitches, the third for backstitch outlines and lettering. Evenweave and linen are listed by how they are stitched, over 2 threads or over 1. If the count number itself is the puzzle, the [aida count chart](https://hoopandfloss.com/blog/aida-count-chart) explains it.

| Fabric | Strands for crosses | Strands for backstitch |
| --- | --- | --- |
| 11 count aida | 3 | 1 or 2 |
| 14 count aida | 2 | 1 (2 for a bold outline) |
| 16 count aida | 2 | 1 (2 for a bold outline) |
| 18 count aida | 1 or 2 | 1 |
| 28 count evenweave or linen, over 2 | 2 | 1 (2 for a bold outline) |
| 32 count, over 2 | 1 or 2 | 1 |
| 36 count, over 2 | 1 or 2 | 1 |
| 28 count, over 1 | 1 | 1 |
| 6 and 8 count aida | No agreed figure: follow the pattern | 1 or 2 |

Usual strands of six-strand embroidery floss by fabric count. Sources differ by one strand in places. A pattern's own instruction comes first.

Note: Dark fabric or fuller coverage takes one strand more. Linen is often stitched with one strand fewer. Most of the one-strand disagreement between charts comes from these two cases.

## What is a strand of embroidery floss?

A skein of embroidery floss is one thick thread 8 m (8.7 yd) long. That thread is made of **six fine strands** lying loosely together. A strand is one of those six. When a pattern says 2 strands, it means two of the six, pulled out and used together as one working thread. It does not mean two full six-strand lengths.

Embroidery thread, cross stitch thread and stranded cotton are other names for the same six-strand floss, so 'how many embroidery threads to use' is the same question. To get clean strands, cut a length of at most 18 in (50 cm), pull out one strand at a time, straight up, then lay the number you need back together. The steps are in [how to separate embroidery floss](https://hoopandfloss.com/blog/how-to-separate-embroidery-floss).

## 18 count aida: one strand or two?

18 count is the one common fabric where charts split. With **2 strands** the crosses fill the 1.41 mm squares and cover the fabric, but the holes are full and the stitches sit close. With 1 strand the stitches are flat and light, and some fabric shows between the legs of each cross. Use 2 strands for solid blocks of color and for dark fabric. Use 1 strand for a light, open look or when the pattern says so. The same choice applies to 32 and 36 count stitched over 2.

## What one strand more or less does to coverage

The right number fills the square without forcing the holes. A change of one strand shows in three ways. To see what a strand count does to your skein total, enter it in the [cross stitch calculator](https://hoopandfloss.com/tools/cross-stitch-calculator), which accepts 1 to 6 strands for any count.

- One strand too few: the fabric shows through the crosses as specks or lines, most of all on dark fabric. Too few strands for the count is a common cause of gaps: see [why cross stitch has gaps](https://hoopandfloss.com/blog/why-does-my-cross-stitch-have-gaps).
- One strand too many: the thread crowds the holes, the stitches sit lumpy and the fabric can pucker. The needle also gets harder to pull through.
- Floss used: more strands per stitch means fewer stitches per skein. On 14 count, an 8 m skein is estimated at about 1,050 to 1,750 full crosses with 2 strands and about 700 to 1,150 with 3.

## How many strands of floss for embroidery stitches?

Surface embroidery has no count, so there is no chart by fabric. DMC's stitch guide shows how to work backstitch, stem stitch, satin stitch, French knots and the rest without giving a strand number for any of them. The pattern decides, and a pattern that says nothing leaves it to you. What can be stated is what each number of strands does to the line, and which embroidery needle carries it.

More strands make a thicker, more raised line and bigger knots. A French knot in 2 strands is a small dot, and the same knot in 6 strands is far larger. On thin or stretchy fabric, heavy thread is also more likely to pucker the cloth. The [embroidery needle size chart](https://hoopandfloss.com/blog/embroidery-needle-size-chart) has the full needle table.

| Strands | What you get | Embroidery needle |
| --- | --- | --- |
| 1 or 2 | The finest line: small lettering, thin outlines, fine detail | Size 9 or 10 |
| 2 or 3 | A medium line, a common general-purpose weight | Size 7 |
| 3 or 4 | A heavier line with more texture | Size 5 |
| All 6 | The boldest line the floss can make, thick and raised | Size 3 (sizes 1 to 5 are quoted) |

Strands of six-strand floss in surface embroidery. Needle sizes are sharp embroidery (crewel) needles and are starting points: sources overlap by a size.

## How to check the strand count before you start

The fabric margin is there to be used. With at least 3 in (8 cm) spare on every side of the design, a small trial block in a corner costs nothing that will show.

1. Cut one length of floss, about 18 in (50 cm), and separate it into single strands. Recombine the number given in the chart for your fabric.
2. In a corner of the margin, at least 1 in from the design area, stitch a block of about 10 by 10 crosses with all top legs slanting the same way.
3. Hold the block at arm's length, first over a light surface, then over a dark one. If fabric shows through as specks, add 1 strand. If the stitches bulge or the holes look forced open, remove 1 strand.
4. Stitch a second 10 by 10 block with the changed number next to the first and compare. Keep the one that covers without crowding, and write the number on the pattern.

Note: An even number of strands allows a knot-free loop start: one strand cut twice as long and folded gives 2 strands. It does not work with 1 or 3. See [cross stitch loop start](https://hoopandfloss.com/blog/cross-stitch-loop-start).

## Quick answers

The chart in short form, in the words people search with. A pattern's own strand count always comes before any chart on this page.

- **Cross stitch: how many strands on 14 count?** 2 strands for crosses and 1 for backstitch. Go to 3 for crosses only if dark fabric shows through.
- **How many strands of floss for embroidery?** The pattern states it. Without a pattern, 2 or 3 strands give a medium line, 1 a fine line and all 6 the boldest.
- **How many embroidery threads to use on 18 count?** 1 or 2. Two strands for solid coverage, one for a light, delicate look.
- **What is a strand of embroidery floss?** One of the six fine threads that make up the floss. A standard skein is 8 m of six strands.
- **How many strands of embroidery floss to use for backstitch?** Usually 1, or 2 for a bold outline.

## Gear guides for this topic

- https://hoopandfloss.com/best/best-embroidery-floss
- https://hoopandfloss.com/best/best-cross-stitch-needles
- https://hoopandfloss.com/best/best-hand-embroidery-needles
- https://hoopandfloss.com/best/best-14-count-aida-cloth

## Sources

- [The Stitchery Corner: How many strands of cross stitch thread](https://thestitcherycorner.com/how-many-strands-cross-stitch-thread/)
- [DMC: How to Use Stranded Embroidery Floss](https://www.dmc.com/US/en/technique-embroidery-use-stranded-thread)
- [Needle 'n Thread: Hand Embroidery Needles, How to Choose Them and Use Them](https://www.needlenthread.com/2014/11/hand-embroidery-needles-how-to-choose-them-use-them.html)
