# Hand embroidery letters: which stitches to use for lettering

Source: https://hoopandfloss.com/blog/hand-embroidery-letters
Published: 2026-10-12
Publisher: Hoop and Floss

For hand embroidery letters, use backstitch for small printed text, stem stitch or split stitch for cursive script, chain stitch for bold, chunky words and padded satin stitch for monograms and large initials. The right choice depends mostly on letter height: under about half an inch, keep to fine line stitches with one or two strands; above an inch, fill stitches start to look good. Short stitches on curves are what make lettering look neat.

## Choose the stitch by letter size

For letters under half an inch tall, such as names on a sampler or a small date, use backstitch or split stitch with one or two strands. Keep stitches about 2 mm long so curves on letters like s, e and g stay smooth. Larger stitches turn round letters into polygons.

For half an inch to about 1.5 inches, stem stitch, split stitch, chain stitch and whipped backstitch with two to four strands all work. Script lettering suits stem stitch best because it flows around curves. Above 1.5 inches, consider filling the letters: satin stitch for thin strokes, long and short for wide ones, or a double row of chain or stem stitch for a bold outline lettering style.

## Backstitch and whipped backstitch for clean text

Backstitch is the go-to lettering stitch for beginners. Bring the needle up one stitch length ahead on the line, go down at the end of the previous stitch, and repeat. Every stitch shares a hole with the last, so lines are continuous. For sharp corners, such as the point of a V or the top of an A, end a stitch exactly at the corner and start the next from the same hole.

Whipped backstitch smooths the line. After the backstitch is done, bring a second thread up at the start and pass it under each stitch without piercing the fabric, always in the same direction. The wrapping hides the joins between stitches and gives a slightly raised, cord-like line that reads beautifully in cursive. Use the same color for a smooth look or a contrasting color for a candy stripe.

[Needles for fine lettering](https://hoopandfloss.com/best/best-hand-embroidery-needles)

## Stem, split and chain stitch for script and bold words

Stem stitch follows curves better than any other line stitch. Work small stitches along the line, coming up halfway back along the previous stitch and always keeping the floss on the same side. On tight curves, shorten the stitches. Keep the working thread on the same side for the whole line; many stitchers keep it on the outside of each curve for the smoothest rope twist.

Split stitch is worked by bringing the needle up through the middle of the previous stitch, splitting the strands. It makes a fine, solid line and works well under a satin fill. Chain stitch, a series of linked loops, gives thick, playful lettering for tote bags, jackets and nursery signs. Use three to six strands and keep loops the same size for an even look.

## Monograms and filled letters with satin stitch

Padded satin stitch makes the raised initials seen on linens and handkerchiefs. Outline the letter in split stitch, fill the inside with rows of small running stitches or split stitches as padding, then work satin stitches across the narrow width of each stroke, covering the outline. Angle the satin stitches consistently, usually at about 45 degrees on curved strokes, and keep them close together.

Satin stitch works best on strokes no wider than about a quarter inch. For thicker strokes, use long and short stitch or split the stroke into two satin areas with a shared center line. One or two strands give a smooth, glossy result; more strands can make satin look lumpy.

## Floss, needles and fabric for lettering

Six-strand cotton floss covers almost every lettering need, because you can change the line weight by changing the strand count. For very fine script, one strand of floss or a single strand of a finer thread gives a pen-like line. Pearl cotton size 8 or 12 makes a smooth, round line in backstitch or stem stitch without separating strands. Metallic floss works for accents such as a date or a single word, but keep lengths short because it frays.

Use a sharp crewel needle sized to the thread: size 9 or 10 for one strand, 7 or 8 for two strands, and 5 for four to six. A tightly woven cotton or linen-cotton blend holds small stitches best. Loosely woven or textured fabrics swallow fine lettering, so if the text is small, choose the smoothest fabric you can.

[Embroidery needle size chart](https://hoopandfloss.com/blog/embroidery-needle-size-chart)

## Transferring and spacing lettering

Lettering looks best when it starts from a clean, well-spaced design. Type or draw the text at the size you want, print it, and transfer it with a light box and a water-soluble pen, a heat-erasable pen, or by printing it on stick-and-stitch stabilizer and sticking it to the fabric. Stick-and-stitch is the easiest way to get accurate fonts onto dark fabric or clothing.

Check spacing before you stitch. Letters such as A, V and W look too far apart if they are evenly spaced, so tighten them slightly. Stitch thicker lines on the downstrokes of script lettering to imitate handwriting. Keep a hoop drum-tight so fine lines do not pucker, and press the finished piece face down on a towel.

[Stick-and-stitch transfer paper](https://hoopandfloss.com/best/best-stick-and-stitch-stabilizer)

## Frequently asked questions

What is the best stitch for embroidering letters? Backstitch for small text, stem stitch for cursive, chain stitch for bold words and padded satin for monograms.

How many strands should I use for embroidered lettering? One or two strands for letters under half an inch, two to four for medium lettering, and three to six for bold chain stitch words.

How do I keep embroidered letters neat on curves? Use short stitches, about 2 mm, on curves, and keep the fabric tight in a hoop.

How do I transfer letters onto dark fabric? Print the text on stick-and-stitch stabilizer, stick it on, stitch through it and rinse it away.

## Gear guides for this topic

- https://hoopandfloss.com/best/best-stick-and-stitch-stabilizer
- https://hoopandfloss.com/best/best-hand-embroidery-needles
- https://hoopandfloss.com/best/best-embroidery-hoops
