# Embroidery floss sizes: stranded cotton vs pearl cotton 3, 5, 8 and 12

Source: https://hoopandfloss.com/blog/embroidery-floss-sizes
Published: 2026-10-01
Publisher: Hoop and Floss

**Short answer:** Six-strand embroidery floss has no size number: you set the thickness by using 1 to 6 of its strands. Pearl cotton is a single twisted thread that cannot be divided, sold in sizes 3, 5, 8 and 12. Size 3 is the thickest and size 12 the finest. A DMC floss skein holds 8 m (8.7 yd). DMC pearl cotton runs from 16.4 yd in a size 3 skein to 131 yd in a size 12 ball.

A label that says size 5 or size 8 is not ordinary six-strand floss. It is pearl cotton, also written perle cotton, and the number is its thickness. Both threads are cotton and both are used for hand embroidery, but they are handled differently: floss is split into strands, pearl cotton is used whole, straight from the skein or ball. This page lines up the sizes, gives the length in each DMC put-up, and says what to do when a pattern names one thread and you have the other.

## Embroidery floss size chart

The chart starts with the one thread you divide and then lists the four you do not, thickest first. Lengths are DMC put-ups. Other brands, and other put-ups of the same size, differ, so read the label for the length before you count skeins.

| Thread | Thickness | DMC put-up | Can you divide it? | Used for |
| --- | --- | --- | --- | --- |
| Six-strand floss (stranded cotton) | Adjustable: use 1 to 6 strands | Skein, 8 m (8.7 yd) | Yes, into six strands | Cross stitch and most surface embroidery |
| Pearl cotton size 3 | Thickest | Skein, 16.4 yd (about 15 m) | No | Bold lines and heavy texture on sturdy fabric |
| Pearl cotton size 5 | Medium heavy | Skein, 27.3 yd (about 25 m) | No | Raised outlines and textured surface stitches |
| Pearl cotton size 8 | Fine | Ball, 87 yd (about 80 m) | No | Finer surface stitches and detail lines |
| Pearl cotton size 12 | Finest | Ball, 131 yd (about 120 m) | No | Delicate lines and fine counted work |

Six-strand floss and pearl cotton sizes with DMC put-ups. Metric lengths for pearl cotton are converted from yards.

## How pearl cotton sizes 3, 5, 8 and 12 work

The size number runs backwards: **the bigger the number, the finer the thread**. Size 3 is the thickest of the four and size 12 the finest, with 5 and 8 between them. Needle sizes follow the same logic, which makes it easier to remember. The number is a grade, not a measurement in millimeters, so it cannot be turned into a diameter from the label. To compare two sizes, lay the threads side by side.

Finer sizes come in longer put-ups. A DMC size 3 skein holds 16.4 yd and a size 5 skein 27.3 yd, while a size 8 ball holds 87 yd and a size 12 ball 131 yd. One ball of size 8 holds more than three times the length of a size 5 skein. When a pattern lists pearl cotton, count yards, not skeins.

## Embroidery floss vs pearl cotton: what is different

Both are cotton embroidery threads with a sheen, and both come in a wide color range. The construction is what separates them, and it changes how each one is used and how it looks on the fabric.

- Six-strand floss is six fine strands lying loosely together. You pull them apart and stitch with as many as the pattern says, so one skein gives every thickness from 1 strand to 6.
- Pearl cotton is one thread with a firm, visible twist. It is used whole, straight from the skein or ball. Trying to split it only unravels the twist.
- On the fabric, floss strands lie flat next to each other and make a smooth surface, which suits cross stitch and satin stitch. Pearl cotton stays round, so each stitch stands up and shows its twist.
- Changing thickness with floss means changing the number of strands. With pearl cotton it means buying another size.

## Is pearl cotton size 5 or 8 equal to a number of strands?

There is no official equivalent. DMC describes pearl cotton as non-divisible, with size 3 the thickest and size 12 the finest, and does not state how many strands of floss match any size. Charts that give strand equivalents are estimates, not manufacturer figures, which is why this page does not print one. Even at a similar thickness the two threads look different, because one lies flat and the other is round and twisted.

If a pattern calls for pearl cotton and you only have floss, stitch a short trial line with 2, 3, 4 and 6 strands on a scrap of the same fabric and pick the weight that matches the pattern photo best. Expect a flatter line. Going the other way, pearl cotton gives a rounder, more textured stitch than the floss the pattern was planned for, so try it on a scrap first.

## Which needle fits each thread?

The thread has to pass through the eye without fraying and through the fabric without leaving a visible hole. For floss, the needle follows the number of strands: the [embroidery needle size chart](https://hoopandfloss.com/blog/embroidery-needle-size-chart) pairs 1 or 2 strands with a size 9 or 10 embroidery needle and all 6 strands with a size 3. Pearl cotton is round and firm, so it needs an eye large enough to take it whole. A size 3 embroidery needle is a published pairing for pearl cotton size 5. Chenille needles, sharp with a large eye, are made for thick thread and suit sizes 3 and 5.

For sizes 8 and 12 the references checked give no fixed pairing. Use the rule that applies to every thread: the hole the needle makes should be just large enough for the thread, no larger. On aida and evenweave, use a blunt tapestry needle whatever the thread, as in the [cross stitch needle size chart](https://hoopandfloss.com/blog/cross-stitch-needle-size-chart).

## DMC floss sizes: what the label tells you

A DMC six-strand floss skein is **8 m (8.7 yd)** of 100% cotton in six divisible strands, sold in 500 shades. The label carries a color number and no size, because the thickness is yours to set. Anchor stranded cotton has the same format: an 8 m skein of six strands.

A pearl cotton label carries both a size (3, 5, 8 or 12) and a color number. In the chart above, sizes 3 and 5 are skeins and sizes 8 and 12 are balls. For stitching, cut either thread to a working length of at most 18 in (50 cm). Longer lengths twist and knot, as explained in [how long embroidery thread should be](https://hoopandfloss.com/blog/how-long-should-embroidery-thread-be).

## What size embroidery floss do I need?

Start from the pattern. The words it uses tell you which thread to buy, and the pattern's choice comes before any general rule.

- The pattern says '2 strands' or lists color numbers only: buy six-strand floss. The [strands chart](https://hoopandfloss.com/blog/how-many-strands-of-floss) gives the number to use for each fabric count.
- The pattern says 'pearl cotton 8' or 'perle 5': buy that size. The stitches were planned for that thickness.
- Cross stitch on aida: six-strand floss, 2 strands on 14 count.
- Surface embroidery with no pattern: six-strand floss, because one skein lets you try 1 to 6 strands. Add pearl cotton when you want a raised, twisted line.
- The label just says 'craft thread': that is a different product. See [embroidery floss vs thread](https://hoopandfloss.com/blog/embroidery-floss-vs-thread).

## Quick answers

The size questions asked most often, answered in a line or two. Lengths are DMC put-ups, so check the label on other brands.

- **What is embroidery floss size 5?** Pearl cotton size 5: a twisted, non-divisible thread, second thickest of the four sizes. A DMC skein holds 27.3 yd.
- **What is embroidery floss size 8?** Pearl cotton size 8, finer than size 5. The DMC ball holds 87 yd.
- **What is embroidery floss size 3?** Pearl cotton size 3, the thickest size, in a 16.4 yd skein.
- **Embroidery floss vs pearl cotton: can pearl cotton be separated?** No. It is made to be used whole. Only six-strand floss is divisible.
- **What types of embroidery floss are there?** In cotton, two main types: six-strand floss, and pearl cotton in sizes 3, 5, 8 and 12.

## Gear guides for this topic

- https://hoopandfloss.com/best/best-embroidery-floss
- https://hoopandfloss.com/best/best-hand-embroidery-needles
- https://hoopandfloss.com/best/best-embroidery-floss-organizer

## Sources

- [DMC: Pearl Cotton thread](https://www.dmc.com/US/en/products/pearl-cotton-thread)
- [DMC: Cotton Embroidery Floss](https://www.dmc.com/US/en/products/mouline-special)
- [Needle 'n Thread: Hand Embroidery Needles, How to Choose Them and Use Them](https://www.needlenthread.com/2014/11/hand-embroidery-needles-how-to-choose-them-use-them.html)
