# Best embroidery hoop stands: lap, table clamp and floor models Source: https://hoopandfloss.com/best/best-embroidery-hoop-stand Publisher: Hoop and Floss. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://hoopandfloss.com/how-we-pick An embroidery hoop stand holds the hoop so both hands are free: one above the fabric, one below. For hand embroidery and cross stitch there are three types. A lap or sit-on stand has a flat base that rests on a table, on your lap or under your leg, and suits a sofa or armchair. A table clamp stand grips the edge of a desk. A floor stand carries a side clamp on a post over a flat base, and is the type that most often takes Q-Snap and scroll frames as well as hoops. Listings differ in the hoop sizes and frame types the clamp accepts, the height range, how the head rotates to reach the back of the work, the material (beech wood or metal) and whether hoops come in the box. Most listings do not state the weight of the stand. This guide compares stands for an embroidery hoop by type, what they hold, height and material, using only what each listing states. Nothing was tested. ## Picks ### 1. ZOCONE Beech Wood Embroidery Hoop Stand with 2 Pcs 6'' 8'' Embroidery Hoops Type: Lap / table; Holds: Round or square hoops; Height: 13.9 to 19.4 in; Material: Beech wood A beech wood lap stand with a hoop clamp, sold with 6 in and 8 in embroidery hoops and installation instructions. Height adjusts from 13.9 to 19.4 in, for use on the lap or on a table. What the listing offers: - The set includes the wood lap frame, step-by-step installation instructions and two embroidery hoops, 6 in and 8 in. - Height ranges from 13.9 to 19.4 in, with a 360 degree hoop spin knob and a joint that moves 220 degrees up and down. - The listing says round or square hoops of different sizes insert into the hoop clamp, and that the stand detaches for storage. Limits to know: - The listing does not mention Q-Snap or scroll frames: the clamp is described for hoops only. - No weight or base dimensions are stated, only that the base has been widened. ### 2. Nurge Medium Seating Embroidery Stand with 2in1 Snap Head 20 Inch Height Type: Sit-on; Holds: Hoops and snap frames; Height: Up to 19.68 in; Material: Beech wood A beech wood sit-on stand whose flat base slips under your legs, with a 2-in-1 head that holds both snap frames and traditional hoops. It suits stitching on a sofa, armchair or bed. What the listing offers: - The 2-in-1 head holds both snap frames and traditional hoops, according to the listing. - Three adjustable joints reach up to 19.68 in, and the listing says the work can be flipped to check the back. - Made of natural beech wood; the listing says the seat base slips under the legs on an armchair, couch or bed, or works at a desk. Limits to know: - The visible listing text does not state the hoop or frame sizes the head accepts. - No hoop or frame is included, and the weight and base dimensions are not stated. ### 3. BESTOCEAN Needlepoint Stand, Adjustable Embroidery Stand & Cross Stitch Floor Stand with Lighted Magnifier, Heavy Duty Metal Frame Stand Holder for Hoops, Q-Snap & Scroll Rods up to 20" Wide Type: Floor; Holds: Hoops, Q-Snap, scroll rods; Height: not stated; Material: Stainless steel, metal A metal cross stitch floor stand sold as a kit with an attachable LED lighted magnifier and an extra expansion clip. It holds hoops, Q-Snap frames and scroll rods up to 20 in wide on a 14 in weighted base. What the listing offers: - The kit includes the stand, an attachable LED lighted magnifying glass and one extra expansion clip. - The listing says it accommodates Q-Snap frames, scroll rods up to 20 in wide and most common embroidery hoops. - Built from stainless steel and metal with a 35 cm (about 14 in) weighted base, and the frame rotates 360 degrees. Limits to know: - The listing says height and angle adjust but gives no height range in the visible text. - The weight of the stand and the magnification of the lens are not stated. ### 4. TINDTOP Beech Wood Embroidery Hoop Stand, with 3pcs Embroidery Hoops Type: Lap / table; Holds: Hoops (3 included); Height: 11.8 to 15.7 in; Material: Beech wood A shorter beech wood stand, adjustable from 11.8 to 15.7 in, that comes with 3 in, 6 in and 8 in bamboo embroidery hoops. A beginner set for stitching at a table or on the lap. What the listing offers: - Comes with one beech wood embroidery hoop stand and three bamboo embroidery hoops: 3 in, 6 in and 8 in. - Height is adjustable from 11.8 to 15.7 in (30 to 40 cm), with a 360 degree hoop spin knob. - The listing says the base has been widened for stability and that the stand is simple to install and use. Limits to know: - At 15.7 in it has the lowest stated maximum height in this guide, and the largest hoop it holds is not stated. - The included hoops are bamboo, not beech, and Q-Snap or scroll frames are not mentioned. ### 5. Somivrusa Workstand with Side Clamp for Lowery Stand Cross Stitch Stand Type: Floor; Holds: Hoops, Q-Snap, scroll frames; Height: 21.6 to 35.4 in; Material: Metal A floor stand with a side clamp and an 8 x 12 in metal base that slides under a sofa or chair. Height adjusts from 21.6 to 35.4 in, and it holds round hoops, Q-Snaps and scroll frames up to 20 in. What the listing offers: - Height adjusts from 21.6 to 35.4 in, and the clamp swivels 360 degrees, according to the listing. - The listing says it holds round hoops, Q-Snaps and scroll frames up to 20 in. - The metal base is 8 x 12 in and 1.5 mm thick, and is described as sliding under sofas or chairs. Limits to know: - The total weight of the stand is not stated, and the brand is little known. - No hoop, frame, light or chart holder is included: the listing describes the stand alone. ### 6. Airo Beech Wood Embroidery Hoop Stand,Rotatable, Tool-Free Installation, for Cross Stitch , Embroidery, Sewing Needlework Type: Lap / table; Holds: Hoops under 11 in; Height: not stated; Material: Beech wood A beech wood stand that grips the hoop between two sliding poles on a crescent-shaped base, for round or square hoops under 11 in. Used on a tabletop or lap, and also for displaying finished work. What the listing offers: - The two poles slide toward the middle to hold hoops up to 11 in, with a groove that clamps the hoop, per the listing. - The listing says it takes round and square hoops under 11 in regardless of brand or material. - Rotates 360 degrees horizontally and 180 degrees longitudinally, and assembles without tools from the included parts. Limits to know: - No height figure is stated, and no hoop is included with this version. - Hoops over 11 in do not fit, and Q-Snap or scroll frames are not mentioned. ### 7. Black Adjustable 3-in-1 Hoop/Tablet/Phone Holder Embroidery Hoops Stand Type: Floor or table clamp; Holds: Hoops, phone, tablet; Height: not stated; Material: not stated A 3-in-1 stand with an embroidery clamp, a floor base, an arm stand, a desktop clamp and a phone holder. The only pick here with a table clamp: the arm mounts on a desk or on the floor base. What the listing offers: - The set includes an embroidery clamp, a floor base, an arm stand, a desktop clamp and a phone holder. - It converts between floor and desktop use: the arm stand connects to the base to work as a floor stand. - Height and tilt angle are adjustable, and the listing says assembly requires no additional tools. Limits to know: - The listing gives no height range, no hoop sizes, no desk thickness for the clamp and no materials. - It is described as lightweight and doubles as a phone and tablet holder, not a dedicated needlework stand. As an Amazon Associate I earn from qualifying purchases.